Paavai Institutions

UG Courses

Eligibility for admission to first year B.E. / B.Tech. programmes (As per norms of Govt. of Tamilnadu)

  • A pass in XII std., of Tamilnadu HSC (Academic) with Maths, Physics and Chemistry. (or)
  • A pass in XII std., of Tamilnadu HSC (Vocational Stream) with Engineering / Technology Vocational Subjects and any one or two of the related subjects like Maths, Physics or Chemistry.
  • A pass in an equivalent examination accepted by Universities in Tamilnadu for admission to B.E. / B.Tech., / B.Arch. degree courses.

Rank statement from the approved agency like Consortium of Self Financing Engineering and Arts Colleges is mandatory for admission under Minority / Management quota. (Refer to separate advertisements from the authorities of State Government for Admissions under Government Quota).

Minimum Eligibility Marks

Community HSC (Academic) or Equivalent HSC (Vocational)
OC Average of Mathematics, Physics and Chemistry – 50% Average of Related Subjects and Vocational Subjects – 50%
BC Average of Mathematics, Physics and Chemistry – 45% Average of Related Subjects and Vocational Subjects – 45%
MBC / DNC Average of Mathematics, Physics and Chemistry – 40% Average of Related Subjects and Vocational Subjects – 40%
SC / ST Average of Mathematics, Physics and Chemistry – 40% Average of Related Subjects and Vocational Subjects – 40%

Lateral Entry UG course Eligibility

Qualifying Examination: Diploma Candidates

A pass with prescribed minimum eligibility marks in any one of the Diploma in appropriate branch of Engineering / Technology of the State Board of Technical Education and Training, Tamil Nadu / equivalent prescribed for admission to the Degree Course (Refer list of eligible Degree Courses for various Diploma Courses).

Qualifying Examination: B.Sc. Candidates

A pass with prescribed minimum eligibility marks in any recognized Bachelor’s Degree in Science of minimum 3 years duration with 10+2+3 year’s pattern and studied Mathematics at +2 level or studied Mathematics as core or ancillary subjects at B.Sc. level alone are eligible for admission to B.E/ B.Tech degree courses through Lateral Entry.
 Note: Candidates with Degree other than Bachelor of Science are not eligible.
For any clarification with regard to Diploma qualification, write a letter to DOTE, get it clarified and then admit students. On any account, candidates without prescribed qualifications will not be given admission approval.

Minimum Eligibility Marks

Both Diploma and B.Sc. qualified candidates have to obtain the following minimum eligibility marks for admission to Lateral Entry as prescribed in G.O. (Ms.) No.263, Higher Education (J2) Department, dated: 30.6.2008

S.No. Community Minimum average marks in the Pre-Final and Final semesters put together or Final year
1. General Category 55.00%
2. Backward Class including Backward Class Muslim 50.00%
3. MBC & DNC 45.00%
4. SC / SCA / ST Mere pass in the qualifying examination will suffix and the minimum marks are same as the passing minimum for Diploma examinations of the State Board of Technical Education and Training, Tamil Nadu / B.Sc. Degree examinations / Equivalent.

Qualifying examination marks to be considered for calculation of minimum eligibility marks

Mode of study Qualifying examination marks to be considered for calculation of minimum eligibility marks
Full Time Diploma / B.Sc. Overall percentage of marks obtained by the candidate from 1st semester to 6th semester
Lateral entry Diploma Overall percentage of marks obtained by the candidate from 3rd semester to 6th semester
Sandwich Diploma Overall percentage of marks obtained by the candidate from 1st semester to 7th semester not intervened by industrial training
Part time Diploma Overall percentage of marks obtained by the candidate from 1st semester to 8th semester

List of Eligible Degree courses to the qualifying Diploma in Engineering / Technology Candidates for the year 2015-16

Group Code Group Name Diploma Branch Code Qualifying Diploma Eligibility Degree Course
1 Civil 101 Civil Engineering Civil Engineering
102 Civil And Rural Engineering
103 Civil Engineering (Architecture)
104 Architectural Assistantship
105 Civil Engineering (Sandwich)
106 Architecture (Sandwich)
107 Environmental And Pollution Control Engineering
108 Civil Engineering (Rural Technology)
109 Interior Design
110 Architectural Assistantship (Sandwich)
2 Mechanical 201 Mechanical Engineering Mechanical Engineering

 

Automobile Engineering

 

Mechatronics

 

Aeronautical Engineering

 

Agricultural Engineering

202 Mechanical And Rural Engineering
203 Mechanical Design And Drafting
204 Production Engineering
205 Automobile Engineering
206 Metallurgy
207 Mechatronics Engineering
208 Machine Tool Maintenance And Repairs
209 Tool And Die Making
210 Tool Engineering
211 Foundry Technology
212 Refrigeration And Air-Conditioning
213 Agricultural Engineering
214 Marine Engineering
215 Mechanical Engineering (Production)
216 Mechanical Engineering (Sandwich)
217 Foundry Technology (Sandwich)
218 Machine Tool Maintenance And Repairs(Sandwich)
219 Tool And Die Making (Sandwich)
220 Production Technology
221 Tool Design
222 Mechanical Engineering ( Tool And Die)
223 Automobile Technology
224 Mechanical Engineering ( Foundry)
225 Agricultural Technology
226 Mechanical Engineering (Refrigeration And A/C)
227 Electronics (Robotics)
228 Agricultural Engineering And Farm Equipment Technology
229 Production Engineering (Sandwich)
230 Mechatronics Engineering (Sandwich)
231 Electronics (Robotics) (Sandwich)
3 Electrical 301 Electrical And Electronics Engineering Electrical And Electronics Engineering

 
Electronics And Communication Engineering

 
Computer Science And Engineering

 
Information Technology

302 Electronics And Communication Engineering
303 Electronics And Instrumentation Engineering
304 Electronics Engineering (Instrumentation)
305 Computer Technology
306 Instrument Technology
307 Computer Science And Engineering
308 Instrumentation And Control Engineering
309 Electrical Engineering(Instruments And Control)
310 Electrical Engineering(Sandwich)
311 Information Technology
312 Electronics (WSI)
313 Electrical Engineering
314 Instrumentation Technology
315 Computer Engineering
316 Computer Networking
317 Electrical And Electronics Engineering(Sandwich)
318 Electronics(Robotics)
319 Electronics(Robotics) (Sandwich)
320 Mechatronics Engineering
321 Mechatronics Engineering (Sandwich)
322 Electronics And Communication Engineering (Sandwich)
4 Chemical 401 Chemical Technology Chemical Engineering
402 Petro Chemical Technology
403 Pulp And Paper Technology
404 Polymer Technology
405 Plastic Engineering
406 Sugar Technology
407 Ceramic Technology
408 Petroleum Engineering
409 Plastic Technology
410 Plastic Engineering (Sandwich)
411 Polymer Technology (Sandwich)
412 Chemical Technology (Sandwich)
413 Chemical Engineering
414 Petro Chemical Engineering
415 Pulp And Paper Technology (Sandwich)
416 Plastic Technology (Sandwich)
417 Ceramic Technology (Sandwich)
5 New Courses
Biomedical Engineering
Medical Electronics
Food Technology
Pharmaceutical engineering

Announcements

  • University UG Theory Examination-2016

    Anna University UG Theory Examination Commences on 27.04.2016

    March 4, 2016

  • University PG Theory Examination-2016

    Anna University PG Theory Examination Commences on 10.05.2016.

    April 4, 2016

  • Association inaugural function

    Association inaugural function of all departments was held on 19.07.2017 and the function was inaugurated by the Chief Guest Dr.

    May 3, 2018

  • Trekking at Yercaud

    Our First Year Students are going to Trekking at Yercaud on 23.09.2017.

    May 3, 2018

  • Courses Approved

    Four Courses (Assistant Electrician, Field Technician – AC, Helper – Construction Laboratory & Field Technician and Machining & Quality Technician)

    May 3, 2018

  • Workshop

    A one day Workshop was organized by EEE and ECE departments in the title of “Interpretation on Electrical Components”. The

    May 3, 2018

  • Workshop

    A one day Workshop was planned to conduct EEE department in the title of “Theory and Hands on Training on

    May 3, 2018

  • PCE-Re-opening day-2017

    Re-opening day for the next semester: 03.07.2017(Monday)

    June 4, 2017

  • UG Re-opening day-2017

    UG Re-opening day for the next semester: 18.12.2017(Monday)

    November 4, 2017

  • PEC-Re-opening day-2017

    Re-opening day for the next semester: 03.07.2017(Monday)

    June 4, 2017

STUDENT IMPRESSION

  • Joe Sujin S

    This is very nostalgic to me; coz I have been there sitting in a chair listening to people talk. For me to be given this...

  • MITHILESH PANDEY

    Being an alumnus of Paavai gives such a gallant feeling which is pretty hard to pen it down into few words. My journey with Paavai...

  • SAIRAM SESYA R

    “The only thing that should make leaving college bearable is the hope against hope that you are taking the best part of it with you"....

  • YUVARAJ K

    I always admire about the environment that I had in Paavai. “HOME SWEET HOME”. I always wanted to thank Shri. N.V. Natarajan & Smt. Mangai...

  • GOKULRAJ SARAVANAN

    Back to college, the time I spent at PAAVAI during my graduate years was the most delighted period of my life so far. This is...

Read More >>

VIP IMPRESSION

  • Hui-Kai Su

    Paavai is a very beautiful and clean campus. The professors and students are very polite. Welcome to visit or study in Taiwan.

  • Lung Jieh Yang

    Paavai is a very beautiful campus and has hot desire to enhance the cooperation with Taiwan in future. I hope to visit Paavai again and...

  • Dr.Madhyastha Harishkumar

    Excellent Campus with clean and green surroundings. Homogenized young faculties with motivational and temper of research and teaching attitude for young and aspiring students. This...

  • Ching-Pu Chen

    I am impressed by the cleanness and warm hospitality by Paavai, the moment, we step in. we will cherish our friendship. Thanks.

  • Ying Huei Chen

    A very well organized and the summit, helping universities on both sides. Know more each other and know how to take the next step to...

  • Chin-Hsing Cheng

    ‘Cheng Kung’ means ‘Success’ in Chinese. I wish in the future PAAVAI becomes a great success in incubating younger generation of this great country,India.

  • Dr.Aaron Raymond See

    I would like to thank Paavai University for the honor to be one of the speakers and the hospitality for this visit in India. We...

  • Dr.Sumit Kumar

    I am so happy to be at Paavai Institute. I am thankful to chairman sir for providing me the opportunity to visit this world class...

  • Dr.N.S.Kumar

    Very Good Campus for technical learning and human values. I wish all success in the future.

  • Dr.M.S.Santhosh

    One of the best campuses I have seen. Impressed by the hospitality & the projects displayed.

  • Georgy George IPS

    I am impressed with the Vision and dedication of Management of Paavai Group of Institutions. A lot of work is being done for the educational...

Read More >>
WordPress Image Lightbox Plugin